Defining characteristics

Name	First operational	Numeral system	Computing mechanism	Programming	Turing complete
Zuse Z3 (Germany)	May 1941	Binary	Electro-mechanical	Program-controlled by punched film stock	Yes (1998)
Atanasoff–Berry Computer (US)	1942	Binary	Electronic	Not programmable—single purpose	No
Colossus Mark 1 (UK)	February 1944	Binary	Electronic	Program-controlled by patch cables and switches	No
Harvard Mark I – IBM ASCC (US)	May 1944	Decimal	Electro-mechanical	Program-controlled by 24-channel punched paper tape (but no conditional branch)	No
Colossus Mark 2 (UK)	June 1944	Binary	Electronic	Program-controlled by patch cables and switches	No
ENIAC (US)	July 1946	Decimal	Electronic	Program-controlled by patch cables and switches	Yes
Manchester Small-Scale Experimental Machine (UK)	June 1948	Binary	Electronic	Stored-program in Williams cathode ray tube memory	Yes
Modified ENIAC (US)	September 1948	Decimal	Electronic	Program-controlled by patch cables and switches plus a primitive read-only stored programming mechanism using the Function Tables as program ROM	Yes
EDSAC (UK)	May 1949	Binary	Electronic	Stored-program in mercury delay line memory	Yes
Manchester Mark 1 (UK)	October 1949	Binary	Electronic	Stored-program in Williams cathode ray tube memory and magnetic drum memory	Yes
CSIRAC (Australia)	November 1949	Binary	Electronic	Stored-program in mercury delay line memory	Yes

A succession of steadily more powerful and flexible computing devices were constructed in the 1930s and 1940s, gradually adding the key features that are seen in modern computers. The use of digital electronics (largely invented by Claude Shannon in 1937) and more flexible programmability were vitally important steps, but defining one point along this road as "the first digital electronic computer" is difficult (Shannon 1940). Notable achievements include:

EDSAC was one of the first computers to implement the stored program (von Neumann) architecture.

• Konrad Zuse's electromechanical "Z machines". The Z3 (1941) was the first working machine featuring binary arithmetic, including floating point arithmetic and a measure of programmability. In 1998 the Z3 was proved to be Turing complete, therefore being the world's first operational computer.
• The non-programmable Atanasoff–Berry Computer (1941) which used vacuum tube based computation, binary numbers, and regenerative capacitor memory. The use of regenerative memory allowed it to be much more compact then its peers (being approximately the size of a large desk or workbench), since intermediate results could be stored and then fed back into the same set of computation elements.
• The secret British Colossus computers (1943),^[11] which had limited programmability but demonstrated that a device using thousands of tubes could be reasonably reliable and electronically reprogrammable. It was used for breaking German wartime codes.
• The Harvard Mark I (1944), a large-scale electromechanical computer with limited programmability.
• The U.S. Army's Ballistics Research Laboratory ENIAC (1946), which used decimal arithmetic and is sometimes called the first general purpose electronic computer (since Konrad Zuse's Z3 of 1941 used electromagnets instead of electronics). Initially, however, ENIAC had an inflexible architecture which essentially required rewiring to change its programming.